PsiFS should work on any computer running RISC OS 3.1 or higher.
It has been successfully used on:
Early Acorn Archimedes computers had faulty serial ports that required cables wired differently to operate correctly. The Psion 3-Link and simple RS-232 serial cable will not work unmodified with these machines, but the Acorn A-Link should work without problems. |
PsiFS should work with any computer running either SIBO (Psion Series 3/3a/3c/3mx, Psion Workabout, Psion Siena, Acorn PocketBook I/II or Xemplar PocketBook III) or EPOC (Psion Series 5/5mx/7, Psion Netbook, Psion Revo, Psion Revo Plus, Geofox-One, Ericsson MC218, Oregon Scientific Osaris, Philips Ilium Accent or Philips Synergy) connected via a serial link.
It has been successfully used with:
Unfortunately, some EPOC based mobile phones use a modified version of Psion Link Protocol that is not currently supported by PsiFS. This includes the Ericsson R380, Nokia 9210 and Nokia 9290. |
PsiFS should work over any serial link that can be used with PsiWin (Psion 3-Link, Acorn A-Link or a simple RS-232 serial cable for more recent machines).
It has been successfully used with the following cables:
It has been successfully used with the following serial ports:
Although it has not been tested, PsiFS should also work via an IrDA infrared link if both machines are fitted with suitable interfaces and protocol stacks. |
[Contents] | Copyright © Alexander Thoukydides, 1998, 1999, 2000, 2001, 2002 |